The milk box is square. The main reason is that the canine is the following reasons: 1. Milk is easier to deteriorate. The shape will be easy to deform, and it is often made of square shape. 2, many drinks are carbonated beverages, which are prone to gas expansion during transportation, and round shapes are more stressful than squares.
There is no pressure on milk. It is convenient to put in the square box to transport transportation. The square -describer can save the shelf space, and can fully use the shelf space to reduce the cost indirectly. The can usually be equipped with carbonated beverages. Such drinks contain binary carbonized carbon, which will cause certain pressure when vibrating or heat. When we pulled the cans, the gas runs out because there is pressure inside. The round type may withstand large pressure without changing, while square box cannot withstand the pressure. The expansion information: There are two types of materials for making cans: one is aluminum, and the other is the pornographic iron. The consumption of aluminum metal materials used in the United States for packaging containers reached 1999,200 tons, an increase of 2.24%over 1997. It became the second largest consumer market, accounting for 21.6%of the annual aluminum consumption. It is about seven % lower than the cost of steel cans than aluminum cans, and the steel can beverage packaging market in the South American region, but with the improvement of environmental awareness. As well as the recycling of resources, the aluminum quality of the packaging material is gradually replaced by steel. The adoption rate of Brazil is 65%, which will increase by 10%in two years. It in the spray tank, in the past, it has been dominated by steel, and many products have been shifted to aluminum since 2000, with a growth rate of 2 %to 3 %. In the application, aluminum spray tanks will gradually occupy the market.
Milk has no pressure. Incorporating a square box is convenient for transportation, is usually loaded with carbonated drinks. Such drinks contain binary carbonized carbon. A certain pressure occurs when vibrating or heat. When we pulled the cans, the gas runs out because there is pressure inside. The round type may withstand large pressure without changing. The square box cannot withstand the pressure (try what will happen to the square in the square).
Fangxin (no matter what the container is equipped) can save the shelf space and be able to fully use the shelf space; second: milk needs to be put in the freezer to refrigerate, so I do not feel that it has increased the operating cost. Refrigeration is unavoidable. Then you need By changing the shape of the milk box to make full use of the freezer space to reduce costs indirectly. In terms of cost and benefits of economics, it is understandable that the choice of milk bottle selection. The carbonated beverages are mostly drunk in the container, and round containers are more handicap.
This is related to the processing process of food. Milk currently uses ultra -high temperature instantaneous sterilization sterile cold irrigation. Cold irrigation will not apply additional pressure on the packaging. Therefore Most of them are fascia bags. After molding, it is square, but round carton packaging has already appeared, but it is only used. It is generally used for gas -containing products and high -pressure sterilization after filling. Undertaking a certain pressure, and the circular pressure is the largest.
The milk box is square. The main reason is that the canine is the following reasons:
1. Milk is easier to deteriorate. The shape will be easy to deform, and it is often made of square shape.
2, many drinks are carbonated beverages, which are prone to gas expansion during transportation, and round shapes are more stressful than squares.
There is no pressure on milk. It is convenient to put in the square box to transport transportation. The square -describer can save the shelf space, and can fully use the shelf space to reduce the cost indirectly.
The can usually be equipped with carbonated beverages. Such drinks contain binary carbonized carbon, which will cause certain pressure when vibrating or heat. When we pulled the cans, the gas runs out because there is pressure inside.
The round type may withstand large pressure without changing, while square box cannot withstand the pressure.
The expansion information: There are two types of materials for making cans: one is aluminum, and the other is the pornographic iron. The consumption of aluminum metal materials used in the United States for packaging containers reached 1999,200 tons, an increase of 2.24%over 1997. It became the second largest consumer market, accounting for 21.6%of the annual aluminum consumption.
It is about seven % lower than the cost of steel cans than aluminum cans, and the steel can beverage packaging market in the South American region, but with the improvement of environmental awareness. As well as the recycling of resources, the aluminum quality of the packaging material is gradually replaced by steel. The adoption rate of Brazil is 65%, which will increase by 10%in two years.
It in the spray tank, in the past, it has been dominated by steel, and many products have been shifted to aluminum since 2000, with a growth rate of 2 %to 3 %. In the application, aluminum spray tanks will gradually occupy the market.
Milk has no pressure. Incorporating a square box is convenient for transportation,
is usually loaded with carbonated drinks. Such drinks contain binary carbonized carbon. A certain pressure occurs when vibrating or heat. When we pulled the cans, the gas runs out because there is pressure inside.
The round type may withstand large pressure without changing. The square box cannot withstand the pressure (try what will happen to the square in the square).
Fangxin (no matter what the container is equipped) can save the shelf space and be able to fully use the shelf space; second: milk needs to be put in the freezer to refrigerate, so I do not feel that it has increased the operating cost. Refrigeration is unavoidable. Then you need By changing the shape of the milk box to make full use of the freezer space to reduce costs indirectly. In terms of cost and benefits of economics, it is understandable that the choice of milk bottle selection.
The carbonated beverages are mostly drunk in the container, and round containers are more handicap.
This is related to the processing process of food. Milk currently uses ultra -high temperature instantaneous sterilization sterile cold irrigation. Cold irrigation will not apply additional pressure on the packaging. Therefore Most of them are fascia bags. After molding, it is square, but round carton packaging has already appeared, but it is only used. It is generally used for gas -containing products and high -pressure sterilization after filling. Undertaking a certain pressure, and the circular pressure is the largest.